ASIC Miner Parts for Antminer, Whatsminer & Avalon
Every line is quoted to order. Send the part and the quantity, and NODE29 replies with a price within one business day.
Not in the catalogue?
Parts not listed are sourced to order. Send the part number, the machine model or a photo of the label, and NODE29 replies with price and lead time.
Power supplies Whatsminer power supplies
Whatsminer P231B / P232B power supply — M20 / M30 series
MicroBT 3,300 W air-cooled supply for the M20 and M30 families. The P231B outputs 12 V and...
Power supplies Whatsminer power supplies
Whatsminer P463B / P663B / P467B immersion power supply — M56 / M66
Three-phase oil-immersion supply for Whatsminer M56 and M66 immersion miners, 8,000 W main output. Immersion units run...
Power supplies Whatsminer power supplies
Whatsminer P739A power supply — M60 / M60S / M60S+
MicroBT supply for the M60 series, 16 V main output. Input draws up to 27 A at...
120 mm fans Fans
Martech DF1205012B2FN 12 V 8 A cooling fan — Avalon A1346 / A1466 / A1566
120 × 50 mm, 12 V 8 A high-speed fan for the Avalon A1346, A1466 and A1566....
120 mm fans Fans
Avalon 12038 cooling fan, 12 V 4.5 A (YD12038B2G)
120 × 38 mm, 12 V 4.5 A fan built to the spec Canaan fits in its...
Bitdeer power supplies Power supplies
Bitdeer SealMiner A2 power supply (single input)
Replacement supply for the air-cooled Bitdeer SealMiner A2 (A2 Air), single AC input version. Check the label...
APW11 Bitmain APW power supplies Power supplies
Bitmain APW11M1216-1a power supply — S21 XP Imm
Immersion supply for the Antminer S21 XP Imm, fed from 380–415 V three-phase. APW11 units differ by...
Control boards Fluminer control boards
Fluminer T3 control board
Replacement control board (CBU) for the Fluminer T3 home miner, including fan and cooling control. It carries...
PDUs
30A metered PDU, 240V L6-30P — 6× C13 + 2× C19
Single-phase metered PDU for small rows and test benches. The display reads volts, amps, watts and kWh...
PDUs
Bitmain ANTPDU PW12V1 100A 3-phase PDU
Bitmain 12-port PDU for Antminer rows. Input is 346–480 V three-phase with neutral, so it suits 415...
120 mm fans ElphaPex fans Fans
ElphaPex 2200 rpm cooling fan — DG Home 1
Replacement 120 mm radiator fan for the ElphaPex DG Home 1. PWM speed control on a 4-wire...
ElphaPex power supplies Power supplies
ElphaPex FP103 power supply — DG1+
Replacement supply for the ElphaPex DG1+ Scrypt miner. The FP103 replaced the discontinued FP102 and takes two...
Repair tools & test fixtures
Lubass testing kit
Handheld bench tester with an English menu, covering Antminer and Whatsminer hashboards, fan tests, APW power supply...
Repair tools & test fixtures
B8Pro hashboard test fixture
Standalone hashboard tester for Antminer and Whatsminer boards. Reads chip count and board temperature, runs a TX...
APW17 Bitmain APW power supplies Power supplies
Bitmain APW17 (ver B) power supply
The mid-life APW17 revision. Read the version letter off the label before ordering; if you are unsure,...
APW17 Bitmain APW power supplies Power supplies
Bitmain APW17 (ver A) power supply
The first APW17 revision. Read the version letter off the label before ordering — the A, B...
Control boards Whatsminer control boards
Whatsminer CB2 V16 control board
MicroBT control board for the M20, M30 and M50 series.
Fits: Whatsminer M20 · Whatsminer M30 · Whatsminer...
Control boards Whatsminer control boards
Whatsminer CB6 V9 control board
MicroBT control board for the M66S.
Fits: Whatsminer M66S
APW12 Bitmain APW power supplies Power supplies
Bitmain APW12 1417 power supply
The high-voltage APW12. Do not confuse it with the APW12 1215 used on the standard S19 family:...
Power supplies Whatsminer power supplies
Whatsminer P221C power supply
MicroBT supply, the C revision of the P221 family. The B and C revisions are not always...
Avalon cables Cables & adapters
Avalon power cord — A1446 / A1466 / A1566
Mains cord for the current Canaan Avalon generation. The A14 and A15 series use their own PSU...
Antminer cables Cables & adapters
4-pin voltage regulation cable — 18 cm
Carries the voltage-adjust signal from the control board to the PSU. When it is missing or broken...
Antminer cables Cables & adapters
P13 power cord — S21 / S19j XP
The S21 generation changed the PSU inlet to a P13 4-pin, so no C-series cord will fit....
Antminer cables Cables & adapters
P33 power cord — S21 Immersion / T21
P33 6-pin cord for immersion and hydro S21 frames, where the PSU sits outside the tank.
Fits: S21...